Sewer And Water Line Repair Vancouver WA
Vancouver WA Sewer and Water Main Repair and Replacement
Who Can Repair My Sewer Line?
Are you a homeowner in Vancouver Washington? If you are, sometimes the pesky plumbing problems can seem overwhelming. A compromised or failing sewer line can lead to major problems. If your plumbing system is causing problems, Henco Plumbing Services, in Vancouver, WA can help. Call us at 360-773-8039 to schedule an appointment. We’ll come to your property and thoroughly inspect your plumbing. We’ll assess the situation, then provide you with an affordable and accurate quote for services. Then we’ll repair or replace your broken sewer plumbing to like new or brand new condition. We’ll even clean up after we’ve completed the project and will cause as little disruption to your daily life as possible while we are working for you.
Repair Small Problems Before They Get Big
Of course, it’s always best to catch the problem early, before a leak or backup can lead to extensive damage to the foundation of your home or property. Some of the early warning signs for sewer plumbing issues include:
- Pooling of water in the interior of your home or basement flooding
- Slow draining or a frequently stopped-up drain
- Foul odors or other unpleasant smells coming from your drains
- Outdoor flooding or pooling of water on or near the exterior of your home
- A drain that you can hear, also known as a gurgling drain
Big Repair Projects Require Big Machinery
We have the equipment to inspect and identify the source or sources of these issues. Solutions to sewer plumbing problems may include partial to full excavations. There is also the possibility of using a trenchless replacement system which would be less invasive to repair your broken pipes.
Trenchless Sewer Line Repair
Trenchless sewer line repair is a technique that eliminates the need to dig up your property. The Journeyman technicians at Henco Plumbing Services can make repairs and restore your sewer pipes, as well as water main lines, very efficiently while keeping your landscaping, fences, driveways and sidewalks fully intact. There are a number of techniques and strategies available for us to use in trenchless repairs. When we inspect your plumbing pipes, we’ll find the exact cause for the problem, then use the most effective approach for repairs.
Here are just some of the benefits of trenchless sewer and line repair.
- The repairs are usually finished in one day
- The trenchless service is much less invasive than trenching methods
- Trenchless repairs maintain your lawn, landscaping, patio, much more than older techniques
- The efficiency of trenchless technology saves you time and money
- The repairs meet the plumbing industry standards and are permanent
Is Trenchless Sewer Line Repair Best For My Situation?
Are you concerned about whether trenchless sewer line or water line repair is the right choice for your repair project? Trenchless sewer line repair is used to correct a number of plumbing problems involving sewer and water line repairs. Trenchless sewer line repair is often used for the following situations.
- Cracked sewer or water pipes caused by movement in the ground or the house
- Underground plumbing pipes located beneath landscaping, homes, or apartment buildings
- Blocked pipes that have burst due to plant roots or household debris
- Improperly installed plumbing pipes that result in constant sewer backups or leaky lines
- Damaged water (or sewer) pipes damaged from winter freezing and thawing
- Installation of larger sewer and water lines to a house, apartment, condominium, or commercial building
Pipe relining is an option to replacing old worn out and broken main plumbing pipes. The materials used will restore the interior portion of your plumbing pipes without totally replacing them.
Here are two popular types of pipe relining systems that we use at Henco Plumbing to successfully repair brokenplumbing pipes.
Pull In Place
If plumbing pipes have larger gaps and cracks, then the Pull In Place technique is the best lining method. The repair material is fixed into the pipe using heat, like steam. Next an epoxy-saturated liner pulled through the existing pipe to the area that requires repair. The Pull In Place method uses two access points: One access point to feed the liner and one to pull it through. During this procedure, air is forced into the pipe to open the sleeve then holds it tight against the inner walls of the pipe until the sleeve is fully dried.
If plumbing pipes are severely damaged, or if the job requires replacing an entire pipe system, or if large sections of sewer pipe require repair, then the Pipe Bursting technique is the best lining method. To gain access to the broken pipe, the installation team dig two four foot square access pits at each end of the pipeline. Then they place what is known as a “bursting head” at the access point at one end of the pipe. The head is then drawn through the pipe using hydraulic power. While the bursting head travels through the old pipe it breaks the old pipe apart, pulling the new pipe behind it. The new plumbing pipe is constructed from a plastic that is very strong and will resist any intrusive action from tree or plant roots for up to 100 years.
How Can We Help You?
Henco Plumbing Services is a plumbing contractor company in the Vancouver Washington area. We specialize in the big projects that require large equipment and plenty of experience. When you need sewer line or water main line repair, contact Henco Plumbing Services at 360-773-8039. We’ll inspect your plumbing pipes, then make recommendations for any necessary repairs. We will provide you with an accurate quote for services before we start your repair project. With your approval, we’ll make the necessary repairs rapidly and professionally. Your water or sewer line will be repaired and we back up our services with a 100% Workmanship Guarantee. Sometimes a big project can be a bit of a financial squeeze and if so, we can arrange 100% financing for you.